Design, Install and Check for Fire Suppression System By Engineer
Install a gas automatic fire extinguishing system.
(Fire Suppression System) Novec 1230 / FM200
Clean Agent Fire Extinguishing System ไafter use does not leave any residue Commonly used in closed areas uninhabited and requires exceptionally fast firefighting. To protect high-value assets that materials or equipment in the room are damaged by fire. or chemical fire extinguishers For example, a room that should be installed, such as a transformer room Computer room, Data Center or Server room, etc.
Fire Suppression System
It is important in the Data Center or Server room when there is a fire incident. If there is no fire extinguishing system that can work immediately. when it happened Equipment in the room, important data in the Data Center or Server room is damaged, therefore there should be an automatic fire extinguishing system. Become a helper to calm the fire quickly and with minimal damage.
Components of automatic fire suppression system
FM200, NOVEC1230
CONTROL PANEL
SMOKE DETECTOR
SOLINOID VALVE, NOZZLE
MANUAL STATION
STROB, HORN, BELL
ABORT STATION
FM200, NOVEC1230
Fire extinguishers containing that can be used either FM200 or Novec1230
CONTROL PANEL
control and command cabinet
SMOKE DETECTOR
smoke detector
SOLINOID VALVE, NOZZLE
Automatic fire extinguishing sprinker device
MANUAL STATION
Manual fire extinguishing device
STROB, HORN, BELL
notification device
ABORT STATION
deactivation device
Automatic fire suppression system
when smoke occurs The smoke detector will work, but the control cabinet will not start the device A to spray fire extinguishers immediately. This is to prevent mistakes.
The system must detect smoke in two points of the smoke detector. The control cabinet to order the alarm device to work but at the time of sending the first notification The device that alerts the bell is to send an alarm signal to allow the Admin to check the fire first, if not sure if it is the fire, Admin can cancel or pause. to make sure and then decide to let the system continue to work or order the injection with Manual
If the control cabinet does not receive the command to stop working. The control cabinet will inject the substance within 60 seconds after receiving the cross zone fire signal. when the fire extinguishing system will be injected in 10 seconds.
If a fire occurs that is out of control already. In order to suppress the occurrence of fires that will cause damage to life. and property quickly Automatic fire suppression systems are therefore needed to stop this damage especially in computer centers. or high-value equipment storage space Use a clean extinguishing agent, it will not cause damage to those equipment.
Our supporters for automatic fire suppression services
30 Soi Nimitmai30 Samwatawanaok Klongsamwa Bangkok 10510.
TAX ID : 0-1055-56013-49-6
Call us
+66 (0) 2-077-8226
+66 (0) 84-151-9125