SECURITY SYSTEM
Security in the Data Center
Design and Install All Access Control System
Access Control System is an automatic access control system It is designed to determine access rights. to relevant internal personnel and prevent misfortunes that may be caused by outsiders that can be used to control all entrances and exits Control a single point or multiple points. and can also be selected to suit various locations, adaptable to general organizations Choose a form of request for permission to enter and exit in several ways, using a code, card or fingerprint. In addition to using it for access control. It can also be applied to There are many other benefits For example, used for reports on the performance of security personnel. to have to check various points The system reports in and out and calculates the working hours of employees. or other uses, etc.
Automatic Access Control System
Automated access control systems are an indispensable solution in every field and level. This is a fundamental element of security such as research institutes, data centers, and areas that need security. to factories, apartments, offices, construction sites, hospitals, schools and banks. Automated access control systems are widely used in places that try to protect property or information from unauthorized people. The “Suprema” automated access control system approach is a bio-based system that offers better security than an RF card-only access control system. It is the most suitable solution with all the features that users need such as simplified user management, multiple zone management, elevator access management. or monitoring the usage in real time
Key Features of Automatic Access Control System
Multi-Factor Authentication System fingerprint, face, RF card and PIN
The world’s best facial recognition and fingerprint technology.
Security System Components
Our Environment Monitoring System (EMS) devices
Environment Monitoring System (EMS) will help monitor the operation of various systems in the server room, data center such as electrical systems, uninterruptible power systems (UPS), water leak detection systems, automatic fire suppression systems, access control systems, smoke detection systems Detector), air conditioning system, Temperature and humidity sensors The system installed in the Server room, Data Center will send an alert signal. to the environmental detection system which has set the work by sending SMS or Email or telephone to the designated controller.
In EMS systems are generally connected to various systems via Digital Input and EMS capability can direct the system Digital Output to the system to work. But some EMS systems can display the results as a Graphic Interface and can measure various values through Sensor systems or through Protocols such as SNMP, etc. It can be said that it is an Advance Function that can be displayed as various values. that can be detected by the installed system and sent the value to EMS to check whether the operating conditions are met or not.
Benefits of EMS
- Able to know the fault status detected by the master device. to help relevant staff to address issues before they become too widespread to be resolved.
- Can be used as a console in the control room for surveillance officers to monitor
- Can be displayed as Graphic for easy to show results in checking for abnormalities.
- Able to connect to advanced equipment (Advance Communication Protocol)
Important components of the EMS system
- Command control system (Controller)
- Digital Input
- Relay Input
- Digital output
- Relay output
- SMS Module
- Interface RJ45 Module
- Monitoring Software
Security System for Data Center
– Generally, the standard of security systems in a Data Center consists of an Access Control system and a CCTV system. and record images of people who enter and exit the Data center
– Nowadays, Fingerprint Access Control is commonly used. for Data center preferably using Proximity Access Control for ease of installation. and assign users For cases where the Data center is large and is located in a building with a Building Automation System (BAS), Access Control and CCTV systems are often connected to the BAS for centralized security.
– The importance of the Access Control system. To prevent unresponsible persons from entering the Data center or to check back when encountering unusual events It is to protect the unauthorized and to check back.
– Surveillance cameras (CCTV) are one of the most commonly used security systems. In the Data center,There are both Analog and IP systems for selection to suit the location and suitability. on demand In addition, choosing a CCTV camera must take into account how much or how low the light is used and what level of sharpness is needed. The wiring from the camera to the data recorder is also a deciding factor. one more thing Recording clarity and sharpness when browsing back are also factors in choosing a CCTV camera to use.
Our Sponsor of Security Services
30 Soi Nimitmai30 Samwatawanaok Klongsamwa Bangkok 10510.
TAX ID : 0-1055-56013-49-6
Call us
+66 (0) 2-077-8226
+66 (0) 84-151-9125